Olympus DS-3000 - Manual (Page 50)

50
Tools Menu
Detect Device
Updates the information on devices that cannot be automatically detected. If a new device is
detected, it is shown in the Device TreeView.
Rename Device Folder
[DS-3000/2000]
Renames the folder names of Folders A, B, and C. The folder names can be up to 8 characters
long and spaces can be used.
However, the following characters are not allowed.
# $ ' @ [ ] \ ~ | ^ { }
[DS-330/10]
Renames the folder names of Folders A, B, C, D, and E. The folder names can be up to 8
characters long and spaces can be used.
However, the following characters are not allowed.
# $ ' @ [ ] \ ~ | ^ { }
Edit Comments
Edits the comments in a DSS or WMA file recorded using the DS-10. You can enter up to 100
characters for the comments.
Select Speaker
When the DS-330 is connected to a PC, the audio can be output to either the PC speakers PC or
the recorder speaker. This is not available for recorders (such as the DM-1, DS-2000/3000, and
DS-150/320) that do not support USB audio
Play
Plays the current active voice file in the Dictation ListView on your PC. The playback start
position in this case is the current display position of the Position Control on the play bar. When the
end of the file (right end of the play bar) is reached, playback automatically stops. The Position
Control either rewinds or remains at the last position on the play bar until the next time playback is
executed. If you execute the playback command when the Position Control is at the end of the file,
the playback starts from the beginning of the file.
Files in the DS-150 are played back on the DS-150, and playback always starts from the beginning
of the file.
Stop
Stops playback, fast forward, or rewind.
Fast Forward
Fast-forwards the file.
Rewind
Rewinds the file.
Intro Scan
Plays the initial five seconds of the files in the selected folder. Scanning starts from the first file
and continues until all the files in the selected folder have been played. When all files have been