Olympus E-400 - Manual (Page 11)

11
Shooting
Basic
gu
id
e
4
Release the shutter
Press the shutter button all the way (fully).
• When a picture is taken, a shutter sound is output.
• The card access lamp blinks and the camera starts recording the picture.
• Never remove the battery or card while the card access lamp mark is blinking.
Doing so could destroy stored pictures and prevent storage of pictures you
have just taken.
When the camera stops operating
To save battery power, the camera automatically enters the sleep mode
(stand-by) and stops operating if not used for approximately 1 minute. The
camera activates again when you touch any button (the shutter button, arrow
pad etc.).
g “Sleep timer” (P. 96)