Protecting images - preventing accidental erasure, Single-frame protect, Protecting selected frames – Olympus E-400 User Manual
Page 87: Canceling all protections, Protecting images, K preventing accidental erasure, Protecting images k preventing accidental erasure
87
Playback functions
4
Protecting images
k Preventing accidental erasure
Protect images you do not want to erase. Protected images cannot be erased
by the single-frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect
and press the
0 (protect) button.
•
9 (protect mark) is displayed on the top
right corner of the screen.
To cancel the protection
Display the images that are protected and
press the
0 button.
Protecting selected frames
This function lets you protect selected images at one time during single-frame
playback or index display.
1
Display the images you want to protect and press the
i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the
i button again.
• During index display, press
p to select the images you want to protect and
press the
i button.
2
Press
p to display the next images you want to protect and press
the
i button.
3
After you have selected the images to protect, press the
0
(protect) button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
1
MENU[q][RESET PROTECT]
[YES]/[NO]
2
Use
ac to select [YES], then press i.
x Notes
• Formatting the card erases all images even if they have been protected.
• Protected images cannot be rotated.
0 button
i button