Ae bracketing – Olympus E-400 User Manual
Page 42
42
Shooting functions
k
V
a
rious shooting function
s
3
AE bracketing
The camera automatically shoots a number of pictures at different exposure
values for each frame. Even in conditions where correct exposure is difficult to
obtain (such as a backlit subject or a scene at dusk), you can pick the picture
you prefer from a selected number of frames with a variety of different
exposure settings (exposure and compensation values). The pictures are
taken in the following order: Picture with optimum exposure, picture adjusted
in
- direction, and picture adjusted in + direction.
E.g.) When BKT is set to [3F 1.0EV]
Compensation value: 0.3, 0.7 or 1.0
Number of frames: 3
1
MENU[X][AE BKT]
2
Use
p to set.
[OFF]/[3F 0.3EV]/[3F 0.7EV]/[3F 1.0EV]
3
Press the
i button.
4
Start shooting.
• The shooting method varies depending on
the setting of single-frame or sequential
shooting.
Single-frame shooting
Each time the shutter button is pressed
fully, a picture is taken at a different
exposure.
• The setting for the next shot is displayed in the viewfinder.
Sequential shooting
Hold down the shutter button until the selected number of frames are
taken. The camera shoots each frame at a different exposure.
• Releasing the shutter button stops auto bracketing shooting. When it stops,
[BKT] on the control panel is displayed in blue.
-1.0EV
+1.0EV
±0
AE BKT
OFF
3F 0.3EV
3F 0.7EV
3F 1.0EV
CANCEL
GO
SELECT
Viewfinder
Exposure
compensation
value of the
next shooting
frame