Olympus FE-300 - Manual (Page 20)

Menu ope
rati
ons
20
EN
The scene selection screen displays sample images and the shooting mode to best suit the situation. This can
be set only when the mode dial is set to
f.
• By switching to another scene, most settings will be changed to the default settings of each scene.
g “f Shooting pictures by selecting a scene mode according to the situation” (P. 12)
• When [ISO] is set to [3200] or higher, the following restriction applies.
• [IMAGE QUALITY] is limited to [2048 × 1536] or lower.
• [FINE ZOOM] is not available.
This function allows you to zoom up to approximately 19x by combining
the optical zoom and image cropping. There is no deterioration in the
image quality since data conversion (by increasing pixel resolution) is not
performed.
• The available magnification varies depending on the [IMAGE QUALITY]
setting.
• The available [IMAGE QUALITY] setting is [SQ1] or lower.
R (still pictures)
OFF P. 21
R (movies)
ON P. 21
AF MODE iESP P. 21
f (Scene)
Shooting pictures by selecting a scene according to the situation
CAMERA MENU
WB ................................................................................................. Adjusting the color of a picture
AUTO The white balance is adjusted automatically for natural color,
regardless of the light source.
5
Sunny day For shooting under a clear sky.
3
Cloudy day For shooting under a cloudy sky.
1
Tungsten light For shooting under tungsten lighting.
w
Fluorescent
lamp 1 For shooting under daylight fluorescent lighting. (This type of lamp is
mainly used in homes.)
x
Fluorescent
lamp 2 For shooting under a neutral white fluorescent lamp. (This type of
lamp is mainly used in desk lamps.)
y
Fluorescent
lamp 3 For shooting under a white fluorescent lamp. (This type of lamp is
mainly used in offices.)
ISO ...................................................................................................... Changing the ISO sensitivity
AUTO Sensitivity is automatically adjusted according to the conditions of the
subject.
50/100/200/400/
800/1600/3200/
6400 A low value lowers the sensitivity for daylight shooting of clear, sharp
pictures. The higher the value, the better the camera’s light sensitivity and
ability to shoot with a fast shutter speed and in low light conditions.
However, high sensitivity introduces noise into the resulting picture, which
may give it a grainy appearance.
FINE ZOOM .............................. Zooming in on your subject without reducing image quality
Function Factory default setting Ref. Page
3
4
OFF /ON