Recording sound with still pictures, Recording movies with or without sound, Creating a panoramic picture – Olympus FE-300 User Manual

Page 21: Changing the focusing area, Muting operational sounds, P. 21, Me nu opera tions

Advertising
background image

Me

nu opera

tions

EN

21

When activated [ON], the camera will record about 4 seconds of audio after
the picture is taken.
When recording, aim the camera microphone at the source of the sound
you want to record.

When [ON] (sound is recorded) is selected, the optical zoom cannot be
used during movie recording. Only the digital zoom can be used.

Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master software on the
provided CD-ROM. An Olympus xD-Picture Card is required for panorama shooting.

Use the arrow pad to specify at which edge you want to connect the pictures; and then compose your shots
so that the edges of the pictures overlap. The part of the previous picture where it will be joined to the next
picture does not remain in the frame. You have to remember what the part in the frame looked like and take
the next picture so it overlaps.

• Press

 to exit.

• Panorama shooting is possible for up to 10 pictures. The warning mark (

g) is displayed after 10 pictures

have been taken.

• There may be cases in which the camera cannot detect a face even if [FACE DETECT] is selected.

This function allows you to mute operational sounds during shooting and
playback (e.g. warning beeps, shutter sounds, etc…).

R (still pictures)...................................................................... Recording sound with still pictures

R (movies)

................................................................. Recording movies with or without sound

PANORAMA

..................................................................................Creating a panoramic picture

AF MODE

......................................................................................... Changing the focusing area

FACE DETECT

The camera searches a face within the frame and focus on it.

iESP

The camera determines which subject within the screen to focus on. Even
when the subject is not in the center of the screen, focusing is possible.

SPOT

Focus selection is based on the subject within the AF target mark.

SILENT MODE

Muting operational sounds

OFF

/ON

OFF/ ON

Connects pictures from
left to right

Connects pictures from
bottom to top

Y: The next picture is

connected at the
right edge.

X: The next picture is

connected at the left
edge.

O: The next picture is

connected at the top.

N: The next picture is

connected at the
bottom.

5

OFF

/ON

Advertising