Sprayhead troubleshooting and repair parts, Parts list, Problem: water splashes over the rim of the bowl – Bradley Smoker WF2708 User Manual

Page 20: Problem: water flow diminishes from the sprayhead

Advertising
background image

Classic Circular 36"/54" Washfountain with Foot Control
WF2605, WF2608 Terrazzo — WF2705, WF2708 Stainless Steel

Installation Instructions

Bradley Corporation • 215-603 Rev. M; EN 06-915B

20

4/6/2007

Sprayhead Troubleshooting and Repair Parts

Problem: Water splashes over the rim of the bowl.

Cause: Foreign matter has reduced the size of the sprayhead slots, causing greater pressure at the

open slots.

Solution: Clean the sprayhead:

1. Disassemble the sprayhead and dislodge any dirt, lime build-up and foreign debris with a wire

brush.

2. Sprayheads with rubber grommet spray rings may be cleaned by rubbing a coin over the grommet.

3. Throttle down the volume control (water spray should strike the bowl without splashing outside

of the bowl).

Problem: Water flow diminishes from the sprayhead.

Cause: Strainer portion of the stop-strainer-check valve is plugged.

Solution: Remove and clean the strainer screen from the stop-strainer-check valve.

NOTE: The sprayhead shown below includes a perforated rubber spray ring grommet that is self-
cleaning. The water pressure flexes the spray holes which slows accumulation of foreign matter and
tends to “break loose” any such deposits that may have accumulated.

1

125-001DE

Neoprene Washer-Top

1

1

2

139-031

Sprayhead Manifold

1

3

124-001AL

Washer

3

4

4

160-211

Carriage Bolt

3

4

5

115-061

Sprayhead Top

1

6

116-008

Sprayhead Bottom

1

7

124-001AT

Washer

3

4

8

161-025

Nut

3

4

9

124-020C

Sprayhead Grommet - Circle

1

10

125-001DF

Neoprene Washer-Bottom

1

1

Sprayhead Assembly

Repair Kit

S05-054

S45-051

Item

Part No.

Description

Qty

Parts List

Advertising
This manual is related to the following products: