Pioneer AVIC-HD1BT - Manual (Page 100)

98
Ch
ap
te
r
10
U
si
n
g
t
h
e AV
S
ou
rc
e (B
ui
lt
-i
n DV
D
Dri
ve a
n
d
R
ad
io
)
AV
Searching for an RDS station by
PTY information
You can search for general types of broadcasting
programmes.
➲ “PTY list” ➞ Page 101
1
Touch [PTY].
2
Touch or to select a
desired programme type.
There are four programme types:
[NEWS&INF] – [POPULAR] – [CLASSIC] –
[OTHERS]
3
Touch [Search] to begin the search.
The tuner searches for a station broadcasting
that programme type.
To cancel the search, touch [Stop].
❒
The programme of some stations may dif-
fer from that indicated by the transmitted
PTY.
❒ If no station is broadcasting the type of
programme you searched for, [Not
Found] is displayed and then the tuner
returns to the original station.
Receiving traffic announce-
ments
TA (traffic announcement standby) lets you
receive traffic announcements automatically, no
matter what source you are listening to. TA can
be activated for both a TP station (a station that
broadcasts traffic information) or another
enhanced network’s TP station (a station carrying
information which cross-references TP stations).
1
Tune in a TP or enhanced other network’s
TP station.
When you are tuned into a TP or enhanced
other network’s TP station the
indica-
tor will light.
2
Press the TA/NEWS button to turn traffic
announcement standby on.
appears in the display. The tuner will
standby for traffic announcements.
If you turned TA function on while tuned in to
neither a TP nor another enhanced network’s
TP station, the
indicator lights.
❒ To turn traffic announcements standby off,
press the TA/NEWS button again.
❒ You can also turn on or off TA function by
touching [TA] on the screen.
3
Use the VOL (2/8) button to adjust the TA
volume when a traffic announcement
begins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4
Press the TA/NEWS button while a traffic
announcement is being received to cancel
the announcement.
The tuner returns to the original source but
remains in standby mode until turning the
traffic announcement standby off.
❒
You can also cancel the announcement by
pressing the TRK (4/6) button or the
P.LIST (8/2) button while a traffic
announcement is being received.
❒ The system switches back to the original
source following traffic announcement
reception.
❒ Only TP and other enhanced network’s TP
stations are tuned in during seek tuning or
BSM when TA is on.
Using news programme inter-
ruption
When a news programme is broadcast from a
PTY code news station, the navigation system can
switch from any station to the news broadcast
station. When the news programme ends, recep-
tion of the previous programme resumes.
1
Press and hold the TA/NEWS button to
turn on news programme interruption.
Press the TA/NEWS button until
or
appears in the display.
MAN-HD1BT-SOFTW-EN.book Page 98 Thursday, April 20, 2006 3:47 PM