Pioneer AVIC-HD1BT - Manual (Page 45)

43
Ch
ap
te
r
4
M
o
dify
in
g Ma
p Co
n
figu
rat
io
n
s
NA
V
I
Changing the View Mode for the
Navigation Map
You can change the map display mode.
❒ You cannot perform this operation in “Scroll
mode”.
1
Touch [Map] in the navigation menu, then
touch [View Mode].
2
Touch the type which you want to set.
➲
“How to Use the Map” ➞ Page 31
Setting the Map Colour Change
between Day and Night
To improve the visibility of the map during the
evening, you can set the timing to change the
combination of the map colour.
1
Touch [Map] in the navigation menu.
2
Touch [Day/Night Display] to change the
setting.
Each time you touch the key changes that set-
ting.
Automatic*:
You can change the colours of a map between
daytime and nighttime according to whether
the vehicle lights are On or Off.
Day:
The map is always displayed with daytime col-
ours.
❒
To use this function with [Automatic], the
Orange/white lead of the navigation sys-
tem must be connected correctly.
❒ You can also change the brightness of the
screen between daytime and nighttime by
[Dimmer].
➲ “Operating the picture adjustment” ➞
Page 140
Changing the Setting of Naviga-
tion Interrupting Screen
Setting whether or not to switch to the navigation
screen from the AV screen automatically when
your vehicle approaches a guidance point such
as an intersection while displaying a screen other
than navigation.
1
Touch [Map] in the navigation menu.
2
Touch [AV Guide Mode] to change the
setting.
Each time you touch the key changes that set-
ting.
On*:
Switching from audio operation screen to nav-
igation screen.
Off:
Screen is not switched.
Changing the Map Colour
You can set the map colour to bluish or reddish.
1
Touch [Map] in the navigation menu.
2
Touch [Road Color] to change the setting.
Each time you touch the key changes that set-
ting.
Red*:
Changes to red based map colours.
Blue:
Changes to blue based map colours.
❒
Check the colour change with the [Map
Legend].
MAN-HD1BT-SOFTW-EN.book Page 43 Thursday, April 20, 2006 3:47 PM