Pioneer AVIC-HD1BT - Manual (Page 126)

124
Ch
ap
te
r
12
Usin
g t
h
e A
V
S
o
u
rc
e
(M
-C
D, iP
od
®
, TV)
AV
(4) Change band
Touching [Band] switches between “TV 1” and
“TV 2”.
(5) Selecting the country group
➲
“Selecting the country group” ➞ Page 124
Storing and recalling broadcast
stations
If you touch any of the preset tuning keys P1 –
P12, you can easily store up to 12 broadcast sta-
tions for later recall with a touch of the key.
1
When you find a station that you want to
store in memory keep touching a preset
tuning key P1 – P12.
The selected station has been stored in mem-
ory. The next time you touch the same preset
tuning key P1 – P12 the station is recalled
from memory. To switch between P1 – P6 and
P7 – P12, touch or . When the touch
panel keys are not displayed, you can display
them by touching the screen.
❒
Up to 24 stations, 12 for each of two TV
bands can be stored in memory.
❒ You can also press the P.LIST (8/2) but-
ton to recall stations assigned to preset
tuning keys P1 – P12.
Storing the strongest broadcast
stations sequentially
1
Touch and hold [BSSM].
BSSM starts. The 12 strongest broadcast sta-
tions will be stored under preset tuning keys
P1 – P12 in order from the lowest channel up.
❒
To cancel the storage process, touch
[Cancel].
❒ Storing broadcast stations with [BSSM]
may replace current broadcast stations
stored in preset memory.
Selecting the country group
1
Touch [Area].
2
Touch [Up] or [Down] to select the appro-
priate country group.
❒ For the details of country code, refer to the
“Owner’s Manual” of the TV tuner.
MAN-HD1BT-SOFTW-EN.book Page 124 Thursday, April 20, 2006 3:47 PM