Uppercase & lowercase, Screen a – Brother PERSONAL EMBROIDERY SYSTEM PE-150 User Manual
Page 35
32
Uppercase & lowercase
The characters to be selected can be switched
from uppercase to lowercase and vice versa by
touching “A/a”.
1. Touch “A”.
2. Touch “A/a” to switch to lowercase.
3. Touch “a”.
1
Touch this key to have the machine sew a reinforcement stitch and stop for the changing of thread
each time a new character is embroidered. (Refer to page 34.)
2
Touch this key to check the character selected. (Refer to page 34.)
3
Touch this key to return to the previous screen character choices.
4
Touch this key to display the next character screen in the sequence.
5
Touch this key to switch between uppercase and lowercase. (Refer to page 32.)
6
Touch this key to change the character size to one of three different sizes. (Refer to page 33.)
7
Touch this key if you would like to change the character position, character size and thread density, or
if you would like to use the Help function.
To change the character position: (Refer to page 43)
To change the character size: (Refer to page 47)
To change the thread density: (Refer to page 47)
To use the Help function: (Refer to page 54)
8
Touch this key to clear the selected characters one by one. (Refer to page 33.)
Screen A
1
2
3
4
6
8
7
5