Accessories – Brother PERSONAL EMBROIDERY SYSTEM PE-150 User Manual
Page 9
No.
Parts Name
Parts Code
1
Cleaning brush
XA4527-001
2
Needle set
X59535-001
75/11 3pcs., 90/14 1 pc.
3
Screwdriver
X53666-001
4
Scissors
184783-001
5
Seam ripper
X54243-001
6
Bobbins (4 pcs)
*****
7
Spool cap (Small)
130013-003
8
Spool cap (Large)
130012-003
9
Embroidery sheet (Regular)
XA3728-001
10
Embroidery frame (Regular)
X58739-003
11
Machine cover (soft type)*
X59351-001
12
Extra spool pin**
130920-051
13
Net***
127610-000
14
Machine cover****
XA0181-051
6
ACCESSORIES
*
When placing the machine cover on the
machine while the embroidery frame is still
attached, touch “CHARACTERS &
DESIGNS” or “CARD” to return the
embroidery arm to it’s storage position. An
alternate method to return the embroidery
arm to it’s storage position would be to turn
the machine off and then turn it on again,
allow the arm to re-set itself and then turn off
the machine.
A cover might not be provieded in some
countries.
**
An extra spool pin should be used for
decorative thread such as metallic thread.
*** If using special threads which wind quickly
off the thread spool, attach a net to the spool
before using.
**** In some countries, the No. 14 machine cover
is supplied as an accessory in place of the
No. 11 machine cover (soft type).
***** Distributed in sets of 10 when ordered
separately.
(Parts Code)
USA and Canada: XA3811-051
Other countries: XA3812-051
1
2
3
4
5
6
7
8
9
10
11
12
13
14