Embroidering from a specific starting point, Changing the pattern direction – Brother PERSONAL EMBROIDERY SYSTEM PE-150 User Manual
Page 48
Advertising
45
Embroidering from a specific starting point
1. Make a mark at the starting position on the fabric in the
frame as shown in the illustration. The mark cannot be too
close to the edge of the frame as the presser foot prevents
the needle from getting very close to the frame.
2. Touch “START/CENTER” to select “START” and then touch
the arrow key to align the hole of the presser foot with the
mark.
Changing the pattern direction
ABC
ABC
ABC
ABC
ABC
The pattern will be rotated clockwise in 90˚ steps as shown in
the illustration at left each time “90˚ clockwise” is touched.
ABC
3. Embroider the pattern.
Advertising