Pioneer AVG-VDP1 - Manual (Page 16)

2 Touch Compass to turn the compass in-
dicator on or off.
# When Compass is not displayed, you can dis-
play it by touching
or .
Turning the time indicator on
or off
The current time is displayed based on the
time difference between the time originally set
in this unit and the current location of your ve-
hicle.
! This function can be operated when select-
ing the cyber and the virtual modes.
! To adjust the time difference, refer to Set-
ting the clock on page 30.
1 Touch Display.
2 Touch Clock to turn the clock indicator
on or off.
Turning the destination
indicators on or off
You can turn on or off the following indicators:
Distance to the destination, Destination name
and Direction line. These indicators are dis-
played only when the destination has been
set.
! This function can be operated when select-
ing the cyber and the virtual modes.
1 Touch Display.
2 Touch Destination to turn the destina-
tion indicators on or off.
Turning the altitude indicator
on or off
This unit can display the altitude of the current
location of your vehicle using GPS locator. You
can turn the altitude indicator on or off.
! This function can be operated only when
selecting the virtual mode.
1 Touch Display and then touch twice.
2 Touch Altitude to turn the altitude indi-
cator on or off.
Setting the level indicator
The level indicator is the motion display inter-
locked with music signal level. You can turn
the motion display on or off. In addition, you
can select the level indicator color.
! These functions can be operated only when
selecting the cyber mode.
Setting the level indicator color
1 Touch Display and then touch Indicator.
2 Touch Indicator to select the desired
color.
Each time you touch Indicator it selects col-
ors in the following order:
Blue (blue)Colorful (colorful)Off (off)
Setting the motion of the level
indicator
1 Touch Display.
2 Touch Sound Motion to turn the motion
display on or off.
Customizing the
Appearance
En
16
Section
04