Brother 1030e - Manual (Page 101)

95
APPENDIX
Resolution The number of vertical and horizontal lines per mm. See: Standard, Fine, Super Fine
and Photo resolution.
Ring Delay The number of telephone rings before the machine answers a call in F/T or FAX ONLY
mode.
Scanning The process of sending an electronic image of an original paper document into your
computer.
Standard resolution 98 x 203 dpi. It is used for regular size text and quickest transmission.
Station ID The stored information that appears on the top of faxed pages. It includes the sender’s
name and fax number.
Super fine resolution 392 x 203 dpi. Best for very small print and line art.
System Setup List A printed report that shows the current setting of your machine.
Thermal transfer A printing process in which heat transfers carbon ink from a ribbon to plain
paper.
Toll Saver (FAX-1030e only) A Message Manager setting that allows the machine to answer after
two ring when a message(s) was received and after four rings when there are no messages. The
caller can hang up (after two rings) without paying for the call if there are no messages to
retrieve.
Tone A form of dialling on the telephone line used for Touch Tone telephones.
Transmission The process of sending documents over the phone lines from your fax machine to the
receiving fax machine.
TX/RX TX means Transmit. RX means Receive.
Xmit Report (Transmission Report) A listing of each transmission, showing the name or fax
number of the receiving party, date, time, and number of pages.