Brother 1030e - Manual (Page 52)

46 Chapter 8
Remote Call Transfer
In order to use the Activation Voice Code, you should first set REMOTE CODE (Menu/Set, 2, 4)
to ON. (See Changing Remote Codes, page 46.)
This function works when you receive the incoming Voice call at the remote DECT cordless phone
externally connected to the fax machine. (See Connecting an External Telephone, page 9.) You can
transfer voice call to the fax machine. But you can not transfer the incoming voice call from the fax
machine to the DECT cordless phone.
To transfer telephone call to the fax machine
When you pick up the voice call at remote DECT cordless phone and would like to transfer it to the
fax machine,
1
Press Activation Voice Code 8 1 at remote cordless phone.
2
The fax machine rings (pseudo-ring same as current F/T ring) and the screen displays
PICK UP PHONE.
3
Pick up the handset and press Tel or Speaker phone (for FAX-1030e only)—OR—Just press
Speaker phone (for FAX-1030e only) at the fax machine in order to transfer the voice call to
the fax machine.
If nobody answers at the fax machine, pseudo-ringing stops after 30 seconds. In that case, it may still
be possible to speak with the caller from the cordless phone. Speech between the fax machine and
the cordless phone (= intercom) is not possible.
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Activation Code is 5 1.
The preset Deactivation Code is # 5 1. The preset Activation Voice Code is 8 1.
To change Remote Codes
1
Press Menu/Set, 2, 4.
2
Press or to select ON (or OFF), and press Menu/Set when the screen displays the
setting you want.
3
If you want to, enter a new Remote Activation Code, then press Menu/Set.
4
If you want to, enter a new Remote Deactivation Code, then press Menu/Set.
5
If you want to, enter a new Activation Voice Code, then press Menu/Set.
6
Press Stop/Exit.
Don’t hang up the call from the cordless phone until the voice call has been
transferred to the fax machine. You will know when this is because you will no
longer be able to hear or talk to the caller via the cordless phone. If you do not wait
until this point before hanging up from the cordless phone, the call will be lost.
If you are always disconnected when accessing your external TAD remotely, try
changing the Activation Code from
5 1 to # # # and the Deactivation Code from
# 5 1 to 1 1 1. You cannot use the same number for the Activation Code, the
Deactivation Code, and the Activation Voice Code.