Replacing the battery pack, Replacing the battery pack -12, Extending battery life – Toshiba Qosmio G30 HD-DVD (PQG31) User Manual

Page 116

Advertising
background image

6-12

User’s Manual

Power

Extending battery life

To maximize the life of your battery pack:

At least once a month, disconnect the computer from a power source

and operate it on battery power until the battery pack fully discharges.

Before doing so, follow the steps below.

If you have extra battery packs, rotate their use.

Store spare battery packs in a cool dry place out of direct sunlight.

Disconnect the AC adaptor when the battery is fully charged.

Overcharging makes the battery hot and shortens life.

If you are not going to use the computer for more than eight hours,

disconnect the AC adaptor.

If you will not be using the system for an extended period, e.g. more

than one month, remove the battery pack.

Replacing the battery pack

The battery pack is classified as a consumable item.
The operating life of the battery pack will gradually reduce through

repeated charging and discharging. It will need to be replaced when it

reaches the end of its operating life.
You might also replace a discharged battery pack with a charged spare

when you are operating your computer away from an AC power source.

This section explains how to remove and install the battery pack.
To remove a discharged battery pack, follow the steps below.

1. Turn off the computer’s power.
2. Disconnect the AC adaptor and turn on the computer’s power. If it

does not turn on go to step 4.

3. Operate the computer on battery power for five minutes. If the

battery pack has at least five minutes of operating time, continue

operating until the battery pack is fully discharged. If the Battery

indicator flashes or there is some other warning to indicate a low

battery, go to step 4.

4. Connect the AC adaptor to the computer and the power cord to a

power outlet. The DC IN indicator should glow blue, and the

Battery indicator should glow orange to indicate that the battery

pack is being charged. If the DC IN indicator does not glow, power

is not being supplied. Check the connections for the AC adaptor

and power cord.

5. Charge the battery pack until the Battery indicator glows blue.

Advertising
This manual is related to the following products: