Using optical media drives, Using optical media drives -2, Loading discs – Toshiba Qosmio G30 HD-DVD (PQG31) User Manual

Page 70

Advertising
background image

4-2

User’s Manual

Operating Basics

Using optical media drives

The full-size drive provides high-performance execution of CD/DVD-ROM

based programs. You can run 12 cm (4.72") CD/DVDs. An ATAPI interface

controller is used for CD/DVD-ROM operation. When the computer is

accessing a CD/DVD-ROM, an indicator on the drive glows.

Refer also to the Writing CD/DVDs on DVD Super Multi drive section for

precautions on writing to CD/DVDs.

Loading discs

To load CD/DVDs, follow the steps below.
1. Turn your computer on.
2. Gently hold the CD/DVD by the edges with its labeled facing up, and

insert it into the optical media drive slot straight on slowly.

Inserting a CD/DVD

You can also tap the Touch Pad to perform functions similar to those of the

left button.

Click: Tap once
Double-click: Tap twice
Drag and drop: Tap to select the object you want to move. Leave your

finger on the Touch Pad after the second tap and move your finger

along the pad to move the object.

Use the WinDVD application to view DVD-Video discs.

Gently push the CD/DVD until it is loaded automatically. Do not push it

forcibly or at an angle to the optical media drive slot. This may cause

damage or adhesion of foreign matter on the surface of the CD/DVD.

These imperfections may prevent the drive from reading from or writing

to it.

Advertising
This manual is related to the following products: