Inserting an sd card, Removing an sd card – Toshiba Qosmio G30 HD-DVD (PQG31) User Manual

Page 168

Advertising
background image

9-6

User’s Manual

Optional Devices

The TOSHIBA SD memory card format utility does not format the protected

area of the SD memory card. Should you need to format all areas of the

memory card, including the protected area, you will need to obtain an

appropriate application that applies the copy protection system.

Inserting an SD card

To insert an SD card, follow the steps below.
1. Insert an SD card in the Bridge media slot.
2. Press gently to ensure a firm connection.

Inserting an SD card

Removing an SD card

To remove an SD card, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to SD card and click.
3. Push in the card and release it to pop the card out slightly.
4. Grasp the card and remove it.

Removing an SD card

SD card

Bridge media slot

Make sure the SD card is oriented properly before you insert it.

Do not turn the computer off or switch to Standby Mode or Hibernate

Mode while files are being copied - doing so may cause data to be lost.

SD card

Bridge media slot

Advertising
This manual is related to the following products: