Toshiba HDR5010 - Manual (Page 24)

Recording Programmes
Recording Conflicts
Your Digital TV recorder can record up to two programmes at the same time.
If you attempt to record three or more programmes that overlap, the unit will try to resolve the
conflict automatically by recording the programme at a different time or on a different channel.
If it can not, you will be asked to either select an alternative time to record the programme
(Resolve conflict) or cancel the recording request you have just made (Cancel timer).
You will then be presented with a list of all the programmes that overlap.
If one of the programmes is repeated later in the week then, when it is highlighted, the box
will give you the option to press the [GREEn] button (Alternative) to record the repeated
programme instead. If none of the programmes are repeated, simply delete one of the
planned recordings by pressing the [RED] button (Delete).
note:
• The Digital TV recorder will record programmes even if the programme is shown later than advertised e.g. due
to a previous programme overrunning. Please note, this is not applicable for timers set manually.
• It is safe to put the Digital TV recorder into Standby when you have set programmes to record. The Digital TV
recorder will automatically wake up from Standby to make the recording.
• The Digital TV recorder will also automatically add 3 minutes to the end of each recording to make sure the
entire programme is recorded. However, if any subsequent recording starts during those 3 minutes, then the
first recording will be stopped to allow the new recording to commence.
Using your Digital TV recorder
24
HDR5010 User Guide.indb 24 22/07/2010 10:38