Toshiba HDR5010 - Manual (Page 37)

Main Menu options
3. Dolby Surround.
Select this option if connecting to a TV/Amplifier that supports Dolby Surround Pro
Logic, Dolby Pro Logic II, Dolby Pro Logic IIx or Dolby Pro Logic IIz decoding.
- All outputs will carry Stereo (with Dolby Surround).
4. Stereo.
Select this mode if connecting to a Stereo audio device.
- All outputs will carry Stereo (without Dolby Surround).
Audio Delay
Allows you to delay the audio timing so that it synchronises with the TV picture. This
allows for delays that may be introduced by some TVs.
Dynamic Range Control
The following options are available:
1. off <default>.
The sound output is as is intended by the programme being watched.
2. TV mode.
Default values of Cut and Boost are selected to both reduce high volume and
increase low volume sound, relative to the main sound level through your TV.
3. on.
Allows Cut and Boost values to be changed.
Cut: Allows you to reduce high volume sounds such as explosions, relative to the
main sound level.
Boost: Allows you to increase low volume sounds such as speech or background
sounds, relative to the main sound level.
note:
• These settings are only effective if supported by the broadcaster.
•
network Settings
The following options are available:
1. Automatic <default>.
This is the default option. All settings (IP address, DNS server, MAC address etc)
are automatically selected (DHCP). The settings cannot be changed.
Using your Digital
TV recorder
37
HDR5010 User Guide.indb 37 22/07/2010 10:38