Using the controls, Switching on, Using the remote control – Toshiba L2433 User Manual

Page 15: Using the controls on the tv

Advertising
background image

15

English

Using the Controls

While all the necessary adjustments and controls for the television are made using the remote control,
the buttons on the television may be used control some functions.

ILLUSTRATION SHOWS 32L24.

HDMI 2 INPUT

SOCKET

Common Interface

USB

Headphone

Power

Up / down

(Volume or channel)

Programme / Volume / Source

RED LED - Standby

GREEN LED - Power on

Remote sensor

Switching On

If the RED Standby LED is unlit, check that the
plug is connected to the power supply. If the
picture does not appear press on the remote
control, it may take a few moments.

To put the television into Standby press on
the remote control. To view the television press

again. The picture may take a few seconds

to appear.

For energy saving:

We recommend that you use the television with
factory settings. These settings are designed
for energy saving. Unplugging the mains
plug will reduce energy use to zero. This is
recommended when the television is not being
used for long periods, e.g. when on holiday.
Reducing the brightness of the screen will
UHGXFHHQHUJ\XVH(QHUJ\HI¿FLHQF\UHGXFHV
energy consumption and can save money by
reducing electricity bills.

NOTE: Putting the television into standby mode

will reduce energy consumption, but will
still draw some power.

Using the Remote Control

To set up the television you will now need to
use the on screen menus. Press MENU on the
remote control to see the menus.
7KHRQVFUHHQPHQXDSSHDUVDVDOLVWRI¿YH
topics. As each symbol is selected by pressing
ŻRUŹRQWKHQDYLJDWLRQULQJRQWKHUHPRWH
control.

To use the options, press

to enter the sub

PHQX7KHQSUHVVŸRUźRQWKHQDYLJDWLRQ
ring to move up and down through the menu
and use

to select the required choice. Follow

the on-screen instructions. The functions of
each menu are described in detail throughout
this manual.

Using the Controls on the TV

Press

to adjust volume.

Press

to change programme selection,

then press

to adjust programme selection.

Press and hold

until Source List is

displayed, then press

to scroll through

the list until desired input source is located.

3OHDVHDOZD\VUHIHUWRWKHRZQHU¶VPDQXDORI
WKHHTXLSPHQWWREHFRQQHFWHGIRUIXOOGHWDLOV
NOTE: Inserting the headphone plug will mute

the sound from all speakers.

Advertising