Toshiba L2433 User Manual

Page 9

Advertising
background image

9

English

Aerial cables: - - - - - - - - - - - - - - - - - - -

Connect the aerial to the ANT socket on the rear of the television.

If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to
the television.

SCART cables: - - - -- - - - - - - - - - - - - - -

Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media
player SAT socket to the decoder MEDIA REC. socket.

Before running Auto Tuning put your decoder and media recorder to Standby.

HDMI

®

 +LJK'H¿QLWLRQ0XOWLPHGLD,QWHUIDFH LVIRUXVHZLWKD'9'GHFRGHURUHOHFWULFDOHTXLSPHQW

ZLWKGLJLWDODXGLRDQGYLGHRRXWSXW,WLVGHVLJQHGIRUEHVWSHUIRUPDQFHZLWKLKLJKGH¿QLWLRQ
video signals but will also accept and display 480i, 480p, 576i, 576p, 720p and 1080p. HDMI1 also
support VGA, SVGA, XGA, WXGA and SXGA.

NOTE: Although this television is able to connect to HDMI equipment it is possible that some equip-

ment may not operate correctly.

A wide variety of external equipment can be connected to the back of the television,
therefore the relevant owner’s manuals for all additional equipment must be referred to.

If the television automatically switches over to monitor external equipment, return to normal
television by pressing the desired channel button. To recall external equipment, press

to select.

NOTE: Due to copy protected signal in some DTV programme, non-scrambled content and scram-

bled content with “copy freely (CGMS-A: 00)” are available via SCART analog video and
audio output.

DTV Programme

SCART Analog Output

Scrambled with CGMS-A: 00 (Copy Freely)

Output via SCART

Scrambled with CGMS-A: 01 (Copy No More)

Not output via SCART

Scrambled with CGMS-A: 10 (Copy Once)

Not output via SCART

Scrambled with CGMS-A: 11 (Copy Never)

Not output via SCART

Non- scrambled

Output via SCART

*CGMS-A (Copy Generation Management System-Analog) is a copy protection mechanism for
analog television signals.

Advertising