Toshiba L2433 - Manual (Page 32)

32
English
Digital Noise Reduction
'15 'LJLWDO1RLVH5HGXFWLRQ enables you
to “soften” the screen representation of a weak
signal to reduce the noise effect.
1
In the PICTURE PHQXSUHVVŸRUźWR
select DNR.
3UHVVŻRUŹWRVHOHFWOff, Low, Middle
or High.
NOTE: This function is not available for HDMI
input.
MPEG NR – Noise Reduction
When watching a DVD, the compression may
cause some words or picture elements to
become distorted or pixelated.
Using the MPEG NR feature reduces this effect
by smoothing out the edges.
1
In the PICTURE PHQXSUHVVŸRUźWR
select MPEG NR.
3UHVVŻRUŹWRVHOHFWOff, Low, Middle
or High.
3D Colour Management
When 3D Colour Management is set to On, it
allows the Base Colour Adjustment feature to
become available.
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1
In the PICTURE PHQXSUHVVŸRUźWR
select 3D Colour Management.
3UHVVŻRUŹWRVHOHFWOn or Off.
NOTE: When a DVD movie with subtitle is
playing back, this mode may not work
correctly.
Base Colour Adjustment
The Base Colour Adjustment feature allows
the adjustment of individual colours to suit
personal preference. This can be useful
when using an external source. It only can be
adjusted when 3D Colour Management is set
to On.
1
In the PICTURE
PHQXSUHVVŸRUź
to select Base Colour Adjustment and
press
to enter the submenu.
3UHVVŸRUźWRVHOHFWDQLWHP\RXZDQW
to adjust and press
.
RETURN Back
Base Colour Adjustment
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
0
0
0
0
0
0
Hue Saturation
0
0
0
0
0
0
Brightness
0
0
0
0
0
0
OK Edit
OK
3UHVVŻRUŹWRVHOHFWHue, Saturation
or Brightness.
Base Colour Adjustment
Red
Hue Saturation Brightness
0 0 0
3UHVVŸRUźWRDGMXVWWKHVHWWLQJVDV
required.
NOTE: In the PC Input mode, this function is
not available.