Toshiba L2433 - Manual (Page 55)

55
English
Q
:K\DUHWKHFRORXUVZURQJZKHQDQ
176&VRXUFHLVSOD\HG"
A
Connect the NTSC source via a SCART
cable and play. Select Manual setting
from the SETUP menu and set the
Colour System to Auto.
Manual setting
EXT 1 A
Colour system: Auto
Select Change OK Save RETURN Back
Q
:KDWFDQEHGRQHLIWKHXVHUGH¿QHG
SDVVZRUGKDVEHHQIRUJRWWHQ"
A Use the universal password 1276, then
change to a new number of your choice.
Q
:K\GRQ¶WWKHGHYLFHVFRQQHFWHGYLD
+'0,RSHUDWHSURSHUO\"
A
Make sure to use cables with the HDMI
logo (
® ). Some early HDMI
equipment may not work properly with
the latest HDMI TV products, due to
adoption of new standards.
Q
:K\LVWKH0HGLD3OD\HU'9'SLFWXUHLQ
EODFNDQGZKLWH"
A Check the correct input has been
chosen: S-VIDEO or AV.
Q :K\GLG79WXUQRIIE\LWVHOI"
A
After roughly 15 minutes without any
input video signal at TV mode, the TV will
turn off to reduce power.