Toshiba Portege Z10T-A - Manual (Page 104)

To enter the BIOS setup utility, follow the steps below:
1.
Save your work.
2. In the Settings charm, click Power and then select Restart.
3. Hold down the Volume down button until TOSHIBA Setup Utility is
loaded.
If TOSHIBA Keyboard Dock is connected, the BIOS setup utility can also
be launched through the keyboard operation.
1.
Save your work.
2. In the Settings charm, click Power and then select Restart.
3. Hold down the F2 key and then release this key one second after the
computer is power on.
To save the changes and exit the utility, press the F10 key and proceed by
selecting Yes with the keyboard dock or select Exit -> Exit Saving
Changes -> Yes. The computer will restart immediately.
Navigating the utility
TOSHIBA Setup Utility can be navigated through the touch screen or using
the provided Stylus Pen.
Some buttons on the computer are also designated to execute the
corresponding key function on the keyboard dock. Details are described as
follows:
Button Key Function
Windows Enter key Proceed or confirm
operation
Volume up Up arrow key Select an item
Volume down Down arrow key Select an item
Orientation lock - Turn on/off the virtual on-
screen keyboard
System Recovery
There is a hidden partition allocated on the Solid State Drive for the System
Recovery Options in the event of a problem.
You can also create recovery media and restore the system.
The following items will be described in this section:
Creating Recovery Media
Restoring the pre-installed software from your created Recovery
Media
Restoring the pre-installed software from the Recovery Solid State
Drive
Ordering Recovery discs from TOSHIBA*
User's Manual 5-20