Toshiba Portege Z10T-A - Manual (Page 79)

Figure 4-20 Connecting the RGB cable to the External RGB monitor port
1
2
1. External RGB monitor port 2. RGB cable
There are no fastening screws for an external monitor cable on the
External RGB monitor port. However, external monitor cables which have
connectors with fastening screws can still be used.
2. Turn the external monitor's power on.
When you turn on the power, the computer will automatically
recognize the monitor and determine whether it is a color or
monochrome device.
When displaying desktop on an external analog monitor, desktop is
sometimes displayed on the center of the monitor with black bars
around desktop (with small size).
At that time, please read the manual of the monitor and set the display
mode which is supporting at the monitor. Then it will be displayed with
suitable size with correct aspect ratio.
The HDMI port
HDMI (High-Definition Multimedia Interface) port digitally transfers both
video and audio data without reducing the quality. HDMI-compatible
external display devices including televisions can be connected via the
HDMI port.
To connect an HDMI-compatible display device, follow the steps as
detailed below:
As the port operation of all HDMI display devices have not been confirmed,
some HDMI display devices may not function properly.
To connect a device to the HDMI port, you must purchase a suitable HDMI
cable.
1. Plug one end of the HDMI cable into the HDMI port of your HDMI
display device.
2. Plug the other end of the HDMI cable into the HDMI port on your
computer or on the keyboard dock.
User's Manual 4-27