Toshiba Portege Z10T-A - Manual (Page 26)

1. Disconnect and remove all peripheral devices and cables connected
to the computer.
2. Press the Eject button on the keyboard dock and make sure that the
icon(
) is disappeared from the taskbar or that “Eject Docking
Station” is no longer in the pop-up menu after clicking this icon.
3. Slide and hold the Release latch to the left (unlock position) and then
slowly lift the computer to release it from the computer holder and
completely off the keyboard dock (a, b).
Figure 2-3 Removing the computer from the keyboard dock
a
b 1
2
3
1. Release latch 3. Eject button
2. Computer holder
Computer appearance depends on the model you purchased.
Connecting the AC adaptor
Connect the AC adaptor when you need to charge the battery or you want
to operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from
battery power.
The AC adaptor can automatically adjust to any voltage ranging from 100
to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use
this computer in almost any country/region. The adaptor converts AC
power to DC power and reduces the voltage supplied to this computer.
Always use the TOSHIBA AC adaptor that was included with your
computer, or use AC adaptors specified by TOSHIBA to avoid any risk
of fire or other damage to the computer. Use of an incompatible AC
adaptor could cause fire or damage to the computer possibly resulting
in serious injury. TOSHIBA assumes no liability for any damage
caused by use of an incompatible adaptor.
User's Manual 2-6