Connecting toshiba keyboard dock – Toshiba Portege Z10T-A User Manual

Page 24

Advertising
background image

Before you install a device or application, save any data in memory to
the Solid State Drive or other storage media. Failure to do so may
result in the loss of data.

Connecting TOSHIBA Keyboard Dock

The TOSHIBA Keyboard Dock provided with some models can turn your
computer into a laptop for extensibility including a physical keyboard and
more ports.
To use the computer in laptop mode, you need to connect the TOSHIBA
Keyboard Dock to the computer by following the steps below:
1.

Hold the computer with two hands on both the left and right sides.

2.

Align the docking interface located on the computer with the docking
connector on the keyboard dock.

3.

Press down the computer until it clicks into place. The docking
connector on the keyboard dock engages the docking interface on the
computer.

Figure 2-1 Connecting the keyboard dock

When you are operating in laptop mode, the computer body can be opened
to a wide range of angles for optimal viewing.
While holding down the palm rest with one hand so that the body of the
keyboard dock is not raised, slowly lift the computer body - this will allow
the angle of the display screen to be adjusted to provide optimum clarity.

User's Manual

2-4

Advertising
This manual is related to the following products: