Connecting, Disconnecting – Toshiba Equium L40 User Manual

Page 53

Advertising
background image

User’s Manual

4-5

Basic Operations

Connecting

To connect the internal modem cable, follow the steps below.

1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.

Disconnecting

To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the

connector.

2. Disconnect the cable from the computer in the same manner.

In case of a lightning storm, unplug the modem cable from the

telephone jack.

Do not connect the modem to a digital telephone line. A digital line will

damage the modem.

Do not pull on the cable or move the computer while the cable is

connected.

If you use a storage device such as an optical media drive or hard disk

drive connected to a 16-bit PC Card, you may find that the modem speed

is slow or the communication session might be interrupted.

If you find that the modem speed is low or communication is interrupted

when you are using the modem, set the CPU speed to Maximum within the

Power Options.

Advertising
This manual is related to the following products: