Important information for use – Toshiba Equium L40 User Manual

Page 67

Advertising
background image

User’s Manual

4-19

Basic Operations

Important information for use

Note the following limitations when you write video DVD:
1. Editing digital video

Log in with Administrator rights to use DVD MovieFactory.

Make sure that your computer is running on AC power when using DVD

MovieFactory

Operate the computer at Full Power. Do not use power-saving features.

While you are editing DVD, you can display previews. However, if

another application is running, the preview might not display properly.

DVD MovieFactory cannot edit or play copy protected content.

Do not enter Sleep/Hibernation Mode while using DVD MovieFactory.

Do not operate DVD MovieFactory immediately after turning on the

computer. Wait until all Disc Drive activity has stopped.

When recording to a DV-Camcorder, to ensure you capture all of your

data, let the camcorder record for a few seconds before you begin

recording your actual data.

CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD

functions are not supported in this version.

While recording video to DVD or tape, close all other programs.

Do not run software like a screen saver because it can put a heavy load

on the CPU.

Do not support MP3 decode and encode.

2. Before recording the video to DVD

When you record to DVD disc, use only discs recommended by the

Drive manufacturer.

Do not set the working drive to a slow device like a USB 1.1 hard disk

drive or it will fail to write DVD.

Do not perform any of the following actions:

Operate the computer for any other function, including using a

mouse or TouchPad or closing/opening the LCD panel.

Bump or cause vibration to the computer.

Use the Mode control button and Audio/Video control button to

reproduce music or voice.

Open the DVD drive.

Install, remove or connect external devices, including the following:

PC card, SD card, USB devices, external display, i.LINK. devices,

optical digital devices.

Verify your disc after recording important data.

DVD-R/+R/-RW disc cannot be written in VR format.

Not support to output VCD or SVCD format.

3. About Straight to Disc

Not support to record on DVD-R/+R disc

Advertising
This manual is related to the following products: