Toshiba Magnia 3200 - Manual (Page 15)

Magnia Rack Conversion Kit
Version
7
Last Saved on 14/11/2001 11:48
Warning: Before connecting the AC cords of the system or I/O devices to
the AC inlet, be sure to check the rating of AC inlet. If they exceed the
rating of the AC inlet, it may cause a fire.
CAUTION: To access the mother board, you need to remove the top
panel of the system. Be sure to hold the right and left side of the
panel and shift it to the back.
Do not the hold the back of the panel (close to the rack), it may cause
your fingers to be pinched.
Hold both sides of the
panel and shift to the
back.
Do not remove the
panel, holding the
back of it(close to the
rack).
TOSHIBA Europe GmbH 15
Magnia Rack Conversion Kit – 3030_3100_s00056-EN.doc – Gosen – Printed on 14/11/2001 as PRINTFILENAME