Toshiba Magnia 3200 - Manual (Page 9)

Magnia Rack Conversion Kit
Version
7
Last Saved on 14/11/2001 11:48
Attaching the Front Panel
Attach the front panel after installing the server in the rack, by following
the steps below.
MAGNIA
Intel
Front panel
for rack
mounting Handle
Figure 1-55 Front panel view
CAUTION:
The handles on the front panel are for pulling the server out of the rack,
don’t use them to lift the server up and down.
When attaching the panel to the server, don’t tighten the screws with the
front panel and operation switches touching each other.
1. Seat the front door and secure two retractable screws.
2. Secure
six M3 ×6 screws.
Figure 1-56 Securing a front panel with eight screws
TOSHIBA Europe GmbH 9
Magnia Rack Conversion Kit – 3030_3100_s00056-EN.doc – Gosen – Printed on 14/11/2001 as PRINTFILENAME