Toshiba EL933 - Manual (Page 15)

English
English - 14 -
Input Selection
• Press the button on your remote control repeatedly
for directly changing sources. Or press the button to
display the input list and use or to select a certain
input and press OK to switch to the selected input.
Viewing Info Banner
• Press the i+ button, and the information banner will
appear presenting details of the channel and programme
currently being viewed.
Back At Midday
8:30-10:30
10:30-11:00
English HE-AAC Stereo M6HD
806
Antenna 09:46 576i SD
STTL TTX
The buried Life
• Whenever you change channels, the TV displays the
broadcast picture along with an information banner at
the top of the screen (available only in DTV mode). This
will remain on the screen for a few seconds.
• If the selected channel is locked, you must enter the
correct code to view the channel. “Channel locked!
Press OK and enter your code” will be displayed on the
screen in such a case:
• Enter your code to continue.
Note: The default code is "1234".
Electronic Programme Guide
• Display the Electronic Programme Guide for digital
channels by pressing GUIDE, and the TV guide will
appear as below.
Wednesday, 30-March-2011 9:46:24
30/03/2011 9:00 10:00
806 M6HD
807 TF1 HD
808 TV ONE
809 TV2
810 TVNZ 7
811 U
Good morning
Pyt...
Deal Or No Deal Mary, queen of shops
No information Hindsight
Infomertial Will & Grace Hustle
Journey
Back at Midday
News Summary Travel Journals Spr...
Back at Midday
8:30-10:30 Wed, 30-Mar
(No program details.)
Next day Type filter
Entertainment
Add schedule 0 Schedule list QUICK
• Press or to navigate through different channels
and use or to navigate through the different
programmes.
• Press the red button to list out the previous day's
programmes. And press the green button to list out the
next day's programmes.
• Press the yellow button to check detailed information, if
available, on a highlighted programme.
• To display the programme fi lter, press the blue button.
Use or to select Type or Subtype and or to
select a certain type or subtype.
• Press QUICK to bring up the schedule list menu. The
options include:
Channel Number: Set the recorded channel number.
Start Date: Set the recording date.
Start Time: Set the starting time of recording.
Stop Time: Set the stopping time of recording.
Repeat type: Set a repeat type for recording.
Use / or / to select Add and press OK to add
the schedule into your schedule list. When the time you
set comes, a message will pop up to remind you to
switch to the scheduled channel.
• Press 0 to check all your schedule list information. If you
want to reedit or delete a schedule, use or to select
it and press OK to enter. Press the red button to add
more schedules.
General Operation,
continued