Set up your tv, English, Auto tuning – Toshiba EL933 User Manual

Page 19: Manual tuning, Skipping a channel, Channel swap, Standby channel update

Advertising
background image

English

English - 18 -

Set Up Your TV

Auto Tuning

As new services are broadcast, it will be necessary to
retune the television in order to view them.

Auto Tuning will completely retune the television and can
be used to update the channel list. It is recommended
that Auto Tuning be run periodically to ensure that all new
services are added. All current channels and settings, i.e.
locked channels, will be lost after Auto Tuning is done.

1. Press MENU and use or to select SETUP, then

press OK to continue.

2.

Press

or to select Tuner Mode. And use or to

select Antenna or Cable.

3.

Press

or to select Channel Install and press OK to

continue.

4.

Press

or to select Automatic Search and press

OK to continue.

• If the tuner mode is Antenna, you can select

Digital&Analogue, Digital or Analogue, then press

OK to search all available channels.

• If the tuner mode is Cable,

- When you select

Digital&Analogue or Digital, you

need to fi nish all settings and press OK to search all
available channels;

- When you select Analogue, just

press OK to search

all available channels.

Manual Tuning

In DTV mode, you can do Antenna Manual Installation
or Cable Manual Installation, which depends on the tuner
mode you select.

• For

Antenna Manual Installation, follow the steps

below:

-

Select Antenna Manual Installation under the

Channel Install menu and press OK to enter.

-

Use the numeric buttons to enter a start frequency and

press OK to start search.

For

Cable Manual Installation, follow the steps below:

-

Select Cable Manual Installation under the

Channel Install menu and press OK to enter.

-

You can set the frequency, modulation, and symbol

rate options and press OK to start search.

In ATV mode, the television can be tuned-in manually.

-

Select Analogue Manual Scan under the Channel

Install menu and press OK to enter.

-

Select an appropriate system option.

-

Enter a start frequency at the Search line.

-

Press OK to start search. When a desired channel is

found, you can select Store Current Channel or

Store as New Channel and press OK to confi rm.

Skipping a Channel

When a channel is poor quality or undesired, you can skip
it.
1. Select Channel Settings under the SETUP menu and

press OK to enter.

2. Select Channel Skip under the Channel Settings

menu and press OK to see the list of channels.

3.

Press

or to select a channel and press OK to skip

or unskip.

Once a channel is skipped, it is hidden from the Channel
List and can't be selected by and . You can access it
by using the digit buttons.

Channel Swap

When the channels are installed, you can change the
channels' location.
1. Switch the TV to the channel you want to swap.
2. Select Channel Settings under the SETUP menu and

press OK to enter.

3. Select Channel Sort under the Channel Settings

menu and press OK. The current channel is selected,
then press OK to highlight this channel.

4.

Press

or to move the highlight to the desired

location. Press OK, then the two channels are swapped.

Standby Channel Update

Note: This feature is available for Italy and Hungary

only.

The TV can update digital channels every day while in
standby mode.
1. Select Channel Settings under the SETUP menu and

press OK to enter.

2. Select Standby Channel Update under the Channel

Settings menu and use or to select Auto or
Manual.

Auto: allows the TV to automatically store new digital
channels and update the channel list. If a channel
update is performed, a message appears at startup.
Manual: If new digital channels are found, a message
appears at startup. You can follow the on-screen
instructions.

Advertising