Toshiba EL933 - Manual (Page 22)

English
English - 21 -
Use more of your TV,
continued
HDMI-LINK Playback Device Control
This is a new feature that uses CEC technology and allows you to control HDMI-LINK compatible devices from the TV
remote control via HDMI connection.
When there are two or more HDMI-LINK devices connected to the television, the device selection menu appears. Highlight
the desired device, and then press
OK to select.
GUIDE EXIT
MENU
MENU
CONTENTS ROOT TOP DVD
RETURN
3
6
2 1
3
2 1
8
7
9
4 5
6
8 7
9
4 5
Remote Control Pass-Through Control Panel
NOTE:
• Press Ÿ or ź to select HDMI-LINK in the Quick access menu, and then press OK. The Pass-Through
Control Panel appears.
• Some functions are only available when the Pass-Through Control Panel is displayed on the screen. Please
refer to the following procedure.
• Please refer to the Remote Control image and the following table for the key defi nitions of the Pass-Through
Control Panel.
• MENU and RETURN buttons on the remote control are unavailable when the Pass-Through Control Panel is
on.
No Item Description
1 GUIDE Turn off the desired HDMI-LINK device.
2 EXIT Close the Pass-Through Control Panel.
3
In contents menu:
, , , Navigate contents menu.
OK Enter contents menu, etc.
When viewing the video:
Pause.
Stop.
Rewind.
Forward.
OK Play.
4 MENU Skip Reverse.
5 RETURN Skip Forward.
6 ROOT Access the root menu of a disk or the selected device.
7 DVD Access the setup menu of TOSHIBA DVD player.
8 CONTENTS Access the contents menu.
9 TOP Access the top menu of a disk during playback by TOSHIBA DVD player.
NOTE: These functions depend on the devices connected.