Toshiba Magnia Z300 - Manual (Page 12)

MegaRAID Configuration Console
Installation
12
When you install Client, please set the name of Registration
Server.
RAID_SERVER_NAME=<name of RAID Server>
Ex) RAID_SERVER_NAME=Server1
v Port number for MegaRAID Server
This port number is used to connect from MegaRAID Web
Server to MegaRAID Server service. The port number must
be the same as in Regserv.dat. If you install Client, please set
number as same as in Regserv.dat of Registration Server.
RAID_SERVER_PORT=<number>
Ex) RAID_SERVER_PORT=7777
If there is “#” at first character of line, the line is comment line.
Ex)
Port number for MegaRAID Web Server=1234
Name of RAID Server=Server1
Port number for MegaRAID Server service=7777
In this case, URL address to access to MegaRAID Configuration
Colsole is
“http://localhost:1234/”.
# This is a comment line.
port=1234
RAID_SERVER_NAME=Server1
FRMFILE_DIRECTORY=d\:\\Webraid\\config\\firmware
RAID_SERVER_PORT=7777
LOGFILE_DIRECTORY=d\:\\Webraid\\config\\log
startserverauto=true