Toshiba Magnia Z300 - Manual (Page 2)

2
MegaRAID
Configuration Console
This manual describes how to use the MegaRAID Configuration
Console that is used when the IDE RAID controller is added on.
MegaRAID Configuration Console
Features & Architecture
MegaRAID Configuration Console is a utility which is used for
managing IDE RAID Controller or RAID array, and it enables the
user to connect to a host system and perform all possible opera-
tions upon a RAID Controller Card.
A host system has a suite of software running those are Controller
dependent and host operating system dependent. These are - start-
ing from low level and going to high level - the firmware on the
Controller, the drivers, the RAID API and finally the RAIDServer.
Any configuration utility resides above this stack of software.