Using the hard disk drive (hdd) protection, Using the hard disk drive (hdd) protection -30 – Toshiba Satellite Pro S300L User Manual

Page 110

Advertising
background image

4-30

User’s Manual

S300L

Disconnect the AC adaptor and all peripherals before moving the
computer.

Close the display panel.

Do not pick up the computer by its display panel.

Before carrying your computer, shut it down, disconnect the AC adaptor
and allow it to cool down - a failure to follow this instruction may result in
minor heat injury.

Be careful not to subject the computer to impact or shock - a failure to
follow this instruction could result in damage to computer, computer
failure or loss of data.

Never transport your computer with any cards installed - this may cause
damage to either the computer and/or the card resulting in product
failure.

Always use a suitable carry case when transporting the computer.

When carrying your computer, be sure to hold it securely so that it does
not fall or hit anything.

Do not carry your computer by holding any of its protruding elements.

Using the Hard Disk Drive (HDD) Protection

This computer has a function for reducing the risk of damage on the hard
disk drive.

Using an acceleration sensor built into the computer, TOSHIBA HDD
Protection detects vibration shocks and similar signs of movement of the
computer, and automatically moves the Hard Disk Drive head to a safe
position to reduce the risk of damage that could be caused by head-to-disk
contact.

When vibration is detected, a message will be displayed on the screen, and
the icon in the Taskbar notification area will change to the protection state.
This message is displayed until the OK button is pressed or 30 seconds
pass. When vibration subsides, the icon returns to the normal state.

The TOSHIBA HDD Protection function does not guarantee that the
hard disk drive will not be damaged.

TOSHIBA HDD Protection cannot be used in models that are equipped
with SSD.

Advertising