Toshiba Satellite Pro S300L - Manual (Page 178)

F-4 User’s Manual
S300L
6. Lift the plastic film and clean the cooling module using a vacuum
cleaner or other cleaning tool.
Figure F-2 Lift the plastic film
7. Slide the Cooling module cover back into place on the computer to
reattach.
8. Install the battery pack (refer to the Replacing the battery pack section
in Chapter 6, Power and Power-Up Modes , if required).
9. Turn your computer over.
Do not use a ball pen, cotton swap or similar to remove dust. If these touch
the inside of the computer, it could be damaged or become clogged,
leading to further problems.
Plastic film