Toshiba Satellite Pro S300L - Manual (Page 151)

User’s Manual 8-13
S300L
USB floppy diskette drive
For further information, please refer to Chapter 3, Hardware, Utilities and
Options .
SD/SDHC Card
For further information, please refer to Chapter 3, Hardware, Utilities and
Options .
Problem Procedure
Drive does not
operate Check the connection between the computer and
the drive to ensure that it is properly attached.
Some programs run
correctly but others do
not The computer’s software or hardware
configuration may be causing a problem - ensure
that these configurations match your
requirements (refer to any relevant
documentation, for example that supplied with
any software in use, for further information).
You cannot access the
external floppy
diskette drive Try another floppy diskette in the drive - if you are
able to access this disk then it indicates the
original disk and not the drive is probably causing
the problem.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Problem Procedure
SD/SDHC Card error
occurs Remove the SD/SDHC Card from the computer
and then reinsert it in order to ensure it is firmly
connected.
If the problem persists, then you should refer to
the documentation supplied with your SD/SDHC
Card for further information.
You cannot write to an
SD/SDHC Card Remove the SD/SDHC Card from the computer
and check to ensure that it is not write protected.
You cannot read a file Check to ensure the required file is actually on
the SD/SDHC Card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.