Toshiba KV700 - Manual (Page 18)

English - 17 -
Renaming a Channel
Select the channel that you want to rename and •
select Edit Name option. Press OK button to
continue.
Pressing • Left or Right button moves to the previous/
next character. Pressing Up or Down button
changes the current character. Pressing the numeric
buttons ‘0...9’ replaces the highlighted character with
the characters printed above the button one by one
as the button is pressed.
When finished, press
• OK button to save. Press
MENU to cancel.
Locking a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag a single
channel.
Select the channel that you want to lock by using •
Up or Down buttons.
Select
• Lock option by using Left or Right buttons.
Press OK button to continue.
You will be asked to enter parental control PIN. Enter
•
the PIN number.
Note: Default PIN is set to 0000.
Press • OK button when the desired channel is
highlighted to lock/unlock the channel. Lock symbol
will be displayed next to the selected channel.
Viewing Info Banner
Press • INFO button the information screen will
appear giving details of the channel and programme
currently being viewed.
Whenever you change channel, the TV displays the •
broadcast picture along with an information banner at
the bottom of the screen (available only in DTV mode).
This will remain on the screen for a few seconds.
If the selected channel is locked, you must enter the
•
correct four numeric code to view the channel. “Enter
PIN” will be displayed on the screen in such a case:
Enter the PIN number to continue. •
Electronic Programme Guide
Select the on-screen guide by pressing • EPG, the
guide screen will appear highlighting details of the
channel and programme currently being viewed.
This may take a few moments to appear.
For information on a highlighted programme, press •
INFO button.
For details of other programmes currently available,
•
press RED or GREEN to scroll up and down the list.
As channels are selected, details of the programme
currently being broadcast will appear.
To set the timer for a selected programme, press
•
the OK button to select Timers menu.
Press
• YELLOW or BLUE for advancing to next or
previous day.
Press
• (SWAP) button to jump to the current
broadcast.
Renaming a Channel and
Programme Locking
Viewing Info Banner and
EPG
00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_INTERNET)_10069649.indd 17 00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_INTERNET)_10069649.indd 17 19.10.2010 08:34:02 19.10.2010 08:34:02