Digital settings - confi guration – Toshiba KV700 User Manual

Page 21

Advertising
background image

English - 20 -

Viewing Confi guration Menu

You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press OK to view
this menu. Press the BACK button on the remote
control to exit.

Dolby D Audio (* for EU countries only)

If the channel that you are watching supports Dolby
Digital, you can turn this setting on.

Hard of Hearing (* for EU countries only)

If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.

Use

Up or Down button to select Hard of Hearing

and then press Left or Right button to set this setting
as On or Off.

Controlling Favourite Mode

Use this function to enable or disable favourite
mode.

Press

Left or Right button to set this function as

on or off.

Channel List Mode

You can set a viewing type for channel list using this
setting.

In the

CONFIGURATION menu, use Up or Down

buttons to select Channel List option.
Press

Left or Right button to set this function to TV

Only, Radio Only, Text Only or Show All.

Active Antenna

When antenna power option is set as On, +5V will
be transmitted to the antenna output. This feature
enables the use of active antenna.
Note: Antenna power should be “Off” when standard
antenna is used instead of the active antenna.

Scan Encrypted

When this setting is on, search process will locate
the encrypted channels as well. If it is set as OFF
manually, encrypted channels will not be located
while in automatic search or manual search. Scan
Encrypted Channel feature will always be ON after
performing first time installation.

In the

CONFIGURATION menu, use Up or Down

buttons to select Scan Encrypted.
Press

Left or Right button to set this function as

On or Off.

Receiver Upgrade

This feature helps to keep your TV updated. It works
automatically and searches for new information
when available. Note that this setting is inactive to
be modifi ed.

Please ensure that the TV is set to standby mode.

The TV automatically goes to active standby mode
at 3.00 A.M. each day and searches for any new
information which may be broadcasted and will
download this to your receiver automatically. This
operation will normally take approximately 30
minutes.

Note: Your TV may start in First Time Installation
mode after software update.

Note on Analogue switch-off

This is a digital television which is integrated to
allow the use of both digital and analogue services.
However, during the lifetime of this set it is very likely
that analogue services will be switched off to allow for
more new digital services.
This ‘switch-off’ will happen in a number of phases,
which will be advertised in your area well in advance.
It is recommended that at each phase the television
is re-tuned to ensure that existing and new digital
services can be viewed without disruption.

Digital Settings - Confi guration

You can confi gure DTV settings of your TV by using digital Confi guration menu.

00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_INTERNET)_10069649.indd 20

00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_INTERNET)_10069649.indd 20

19.10.2010 08:34:03

19.10.2010 08:34:03

Advertising