Toshiba KV700 - Manual (Page 26)

English - 25 -
Quick Access to PIP/PAP Mode
At PIP Mode, a small picture (PIP picture) is displayed
on the main picture. There are 1 size and 4 positions
available for the PIP window.
At PAP Mode, two pictures with equal sizes are
displayed on the screen. Aspect Ratios of the windows
are fi xed.
Press the • PIP button to switch to PIP mode.
When PIP Mode is activated, the default active •
window is the PIP window and the active window
is indicated by a yellow frame around it. The active
window can be changed by pressing Left or Right
button.
The status info OSD belongs to active window.
•
The place of the status OSDs are same for both
windows.
Press the
• PIP button again to switch to PAP
mode.
When you switch to PAP Mode, main window in
•
PIP Mode will be displayed on the right side of the
screen.
The active window can be changed by pressing
• Left
or Right button.
Press the
• PIP button once more to exit the PIP/
PAP mode.
Using PIP/PAP MENU
Press MENU and select Feature by using Left or
Right button. Highlight PIP-PAP option by pressing
Up or Down button. Press Right button to display
options.
Using • Left or Right button, you can switch to PIP,
PAP mode or turn off the feature.
If the TV is switched to PIP or PAP mode, Pip-Pap
•
submenu will change accordingly and settings will
appear on the same menu screen.
Note that if you switch to PAP mode by using Pip-Pap
setting, only Source and Swap options will be active
among the menu settings.
Pip-Pap: This line controls Pip/Pap modes. Use
Left or Right buttons to switch the TV to Pip , Pap
or Off .
Pip Size: Using this setting, you can set the size of
the Pip window.
Note : This setting will be inactive if the TV is set to
PAP mode.
PIP Position: This setting is used for moving the
sub picture. Use Left or Right button to adjust PIP
position. Positions available are: Bottom Right, Bottom
Left, Top Left and Top Right.
Source: PIP Source setting enables you to select the
source of the sub picture.
Program: This setting will be unavailable to be
used.
Swap: This function enables to swap between the
main and the PIP picture.
Note: See Appendix E for all PIP/PAP modes.
Picture-in-Picture (PIP), Picture-and-Picture (PAP)
00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_INTERNET)_10069649.indd 25 00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_INTERNET)_10069649.indd 25 19.10.2010 08:34:06 19.10.2010 08:34:06