Bernina Sewing Machine - Manual (Page 12)

Setting up the sewing computer 12
Winding the bobbin
• turn power switch on
•
place empty bobbin on
spindle
• following the direction of the arrow take thread through the rear
guide and round the pre-tension stud
•
wind it several times round the empty bobbin
•
press the engaging lever against the bobbin
•
press the foot control
• the motor will stop automatically when the bobbin is full
• remove the bobbin
Thread cutter
• cut the thread on the thread
cutter
Winding the bobbin
Note:
When winding the bobbin
on the vertical spool holder
(p. 15), it may be necessary to
adjust the speed.
activa 125 (GB) 4.12.2002 14:16 Uhr Seite 12
030595.50.04_0201_a125_EN