Bernina Sewing Machine - Manual (Page 8)

• foot control
• instruction manual
• power cable
• warranty card
• fabric case for standard
accessories
Accessories
Standard accessories*:
4 bobbins (+ 1 in the capsule
in the sewing computer)
Selection of 130/705H needles
Seam ripper
Screwdriver
Angle key Torx
Screwdriver Torx
Lint brush
Seam guide
Compensating plate
3 spool discs
Foam pad
Reverse pattern foot No. 1
Overlock foot No. 2
Buttonhole foot No. 3
Zipper foot No. 4
Blind stitch foot No. 5
* can vary from country to country;
see presser foot selection p. 24
Fabric cover**
• protects from dust and dirt
• compartment for accessories
8 Setting up the sewing computer
Start-stop-unit**
** available as a special accessory
With the Start-stop-unit (SSU)
the start-stop-function can be
controlled by hand.
• press start-stop-button A =
stitching starts
• with the speed regulator B
the sewing speed can be
regulated by hand
•
to interrupt or stop sewing =
press start-stop-button A
again
Note:
If the foot control is connec-
ted with the sewing machine,
the Start-stop-unit is out
functions.
A
B
activa 125 (GB) 4.12.2002 14:16 Uhr Seite 8
030595.50.04_0201_a125_EN