Document Outline

• SST for MAGNIA™ Z500 User’s Guide
  • Copyright
  • Notice
  • Trademarks
• Contents
• Chapter 1
  • Server Setup TooL
    • Checking the Accessories
    • Starting SST
      • Starting the server
        • 1 Make sure that the monitor, keyboard, mouse and all peripherals are correctly connected.
        • 2 Make sure that all power cables are connected to grounded AC outlets.
        • 3 Turn on the power of the monitor.
    • MAGNIA Z500 Front View
      • 4 Turn on the Power button on the computer front, and immediately insert the SST CD-ROM into the ...
      • 5 After a while, the Toshiba Server Setup TooL Start-up screen is replaced with the Main menu.
    • Server Setup TooL Start-up screen
      • 6 After the Server Setup TooL Start-up screen, the Input Locale screen appears.
    • Input Locale screen
      • Starting SST on another system
        • 1 Place the SST CD-ROM into the CD-ROM drive.
        • 2 After the Input Locale screen appears, select one keyboard layout.
        • 3 After finishing the locale setting, the SST Main menu appears.
    • Main Menu
    • Main Menu screen
      • Setup
      • Utilities
• Chapter 2
  • Setup
    • Setup Wizard
      • RAID Configuration
    • RAID Configuration screen
      • Simplified RAID Configuration Setup
    • Simplified RAID Configuration Setup screen
      • Operating System Installation Selection
    • Operating System Installation screen
    • Windows® 2000 Quick Installation
      • Locale Settings
    • Locale Settings screen
      • Create Disk Partition
    • Create Disk Partition screen
      • User Information Settings
    • User Information Settings screen
      • License Mode Setting
    • License Mode Setting screen
      • Server Role Setting
    • Server Role setting screen
      • Network Protocol Setting -1
    • Network Protocol Setting -1 screen
      • TCP/IP Protocol Settings -1
    • TCP/IP Protocol Settings -1 screen
      • DNS/WINS Setting -1
    • DNS/WINS Setting -1 screen
      • Network Protocol Setting -2
    • Network Protocol Setting -2 screen
      • TCP/IP Protocol Settings -2
    • TCP/IP Protocol Settings -2 screen
      • DNS/WINS Setting -2
    • DNS/WINS Setting -2 screen
      • Certificate Service Settings
    • Certificate Service Settings screen
      • 1 If you want to install the Certification Authority (CA), select [Certificate Service], then spe...
      • 2 When installing Certification Authority (CA) and specifying the encryption settings, select [Ad...
      • 3 When you install the Internet Authentication Service, select [Install Internet Authentication S...
      • Public and Private Key Pair Settings
    • Public and Private Key Pair Settings screen
      • CA Identifying Information Settings
    • CA Identifying Information Settings screen
      • Data Storage Location Settings
    • Data Storage Location Settings screen
      • Network Services Setting
    • Network Service Setting screen
      • Domain/Workgroup Setting
    • Domain/Workgroup Setting screen
      • 1 Enter the name of a domain or a workgroup. To make this server a part of a domain for the first...
      • 2 If the server has already been registered for the domain or you want to make this server a part...
      • 3 In the Administrator text box, enter the name of the manager or administrator account that has ...
      • 4 In the Password text box, enter the password of the domain manager account.
      • 5 In the Confirm Password text box, reenter the password to confirm it.
      • Update Driver Settings
    • Update Driver Settings screen
      • Services and Application Installation
    • Services and Application Installation screen
      • HarnessEye/web Setting
    • HarnessEye/web Setting screen
      • Scedule of the consistency check (Windows 2000)
    • Schedule of the consistency check
      • Setup Option
    • Setup Option screen
      • Confirm Parameter Settings
    • Confirm Parameter Settings screen
    • Windows® 2000 Manual Installation using SST
    • Windows® 2000 Manual Installation without using SST
      • Create Floppy Disks for Manual Installation
        • 1 Start the SST by each of the procedure shown below.
        • 2 Select the [Utilities] option in the "Main Menu".
    • Utility Menu screen
      • 3 Select [Create Floppy Disks] option and following items, then select [Create].
    • Create Floppy Disks screen
      • 4 Insert an unused diskette, then select [OK].
      • 5 After creating the diskettes, you must label the diskettes. To check the label descriptions, se...
    • After Installation (Windows® 2000)
      • Confirming and Setting up the Time Zone
        • 1 Start Windows 2000 and log onto it as the Administrator (or a user having equivalent rights).
        • 2 Run Date/Time Properties by clicking Start, Settings, Control panel, and double clicking on Dat...
        • 3 Click Time Zone tab.
        • 4 Check that the current Time Zone setting is correct. If incorrect, select the correct setting a...
      • Installing the Windows 2000 Service Pack
      • Setting up the Physical Address Extension
      • Setting up the SAF-TE Controller
      • Setting up the Active Directory (To make this server as a domain controller)
      • Setting up the AFT/ALB/IPsec function
• Chapter 3
  • Utilities
    • How to Start Utilities
      • About Utilities
      • Starting the Utilities program from SST CD-ROM
        • 1 Make sure that the monitor, keyboard, mouse and all peripherals are correctly connected.
        • 2 Turn on the power button on this server, and immediately insert the SST CD-ROM into the CD-ROM ...
        • 3 The Server Setup TooL starts the Main Menu, and then you can select the [Utilities] option.
      • Selectable items when the Utilities is started from SST CD-ROM
    • Utility Menu screen (started from the SST CD-ROM)
      • Starting the Utilities on another system
        • 1 Insert the SST CD-ROM on the machine where Windows 2000, Windows NT, Windows Me, Windows 98 or ...
        • 2 After a while, the Input Locale screen appears, then select one of the keyboard layout.
        • 3 After finishing the locale setting, the SST Main menu appears.
    • Utility Menu screen (started from another system)
    • Utility Menu
      • Setup Support
    • Create Floppy Disks screen
      • 1 Select the title of the diskette you want to create, then click [Create] to continue.
      • 2 Insert a blank diskette according to the instruction.
      • HW Setup
• Chapter 4
  • HW Diagnostics
    • About HW Diagnostics
    • Starting the HW Diagnostics Program
      • Starting up with the diskette
        • 1 Make sure that the monitor, keyboard,floppy disk drive, mouse and all peripherals are correctly...
        • 2 Set the HW Diagnostics Program diskette. (Set the diskette writable.)
        • 3 Turn on the power of the server.
    • Items of HW Diagnostics
    • Main menu of HW Diagnostics Program
      • Diagnostics Test (01. DIAGNOSTIC TEST)
        • 1 From Diagnostics Test Menu (DIAGNOSTIC TEST MENU) screen, select the desired subtest number fro...
        • 2 After selecting the desired subtest, the following message will appear. (For more detail inform...
    • Diagnostics TEST - TEST PARAMETER
      • Running Test (02.RUNNING TEST)
    • Running TEST - TEST PARAMETER
      • Selecting Items of Running Test
    • TEST ITEM EDIT FOR RUNNING TEST
      • Adding Test Items
      • Deleting Test Items
      • Saving Test Items
      • Execution of Test
    • Sample screen during the test
      • Details of Test Items and Error Log Information
      • [01. MEMORY TEST]
      • [02. KEYBOARD TEST]
      • [03. DISPLAY TEST]
      • [04.FLOPPY DISK TEST]
      • [05. PRINTER TEST]
      • [06. SCSI HDD TEST]
      • [07. NPX TEST]
      • [08. CACHE MEMORY TEST]
      • [09. SCSI TEST]
    • INQUIRY Screen
      • [10. CD-ROM TEST]
      • [11. SAF-TE TEST]
      • [12. BMC TEST]
      • [13. IDE HDD TEST]
      • Log Utilities
    • LOG UTILITIES Screen
      • XXXXX ERRORS
      • PASS COUNT
      • CNT
      • TEST
      • PASS
      • STS
      • ADDR
      • WD
      • RD
      • ERROR NAME / DETAILS
      • Key operation for Log Utilities
      • System Configuration Display
        • SYSTEM
    • SYSTEM screen
      • SCSI
    • SCSI screen
      • IDE
    • IDE screen
    • BMC screen
• Chapter 5
  • Application
    • Installing the HarnessEye/web
    • Installingthe TOSHIBA IDE Backplane Driver
      • 1 Log on to Windows 2000 (or a user having equivalent rights).
      • 2 Insert the SST CD-ROM.
      • 3 Open the command prompt.
      • 4 Change the current directory to the following: <CD-ROM>\PUBLIC\UTILS\TOSHIBA\HSBP\Win2k
      • 5 Enter the following command.
      • 6 Restart the system.
    • Installing the MAGNIA Software Access Point
• Chapter 6
  • Troubleshooting
    • Troubleshooting Information
      • The error that occurs during RAID creation
      • The error that occurs during the OS installation
      • The error that occurs during FD reading
      • The error that occurs during starting SST
      • The error that occurs by incorrect operation