Toshiba HV10 - Manual (Page 11)

11
Picture controls
Selecting the Picture Size
1 Press until the Picture Size list appears on the
screen, then press B or b to select the appropriate
Picture Size (or press repeatedly to select the
desired Picture Size directly).
Picture Size
Wide
4:3
Super Live
2 Press OK.
Wide
Use this setting when watching a wide-screen DVD,
widescreen video tape or a 16:9 broadcast (when
available). Due to the range of widescreen formats (16:9,
14:9, 20:9 etc.), you may see bars on the top and bottom
of the screen.
4:3
Use this setting to view a true 4:3 broadcast.
Super Live (only analogue aerial and standard
video input)
This setting will enlarge a 4:3 image to fi t the screen
by stretching the image horizontally, holding better
proportions at the centre of the image. Some distortion
may occur.
PC Normal (only for HDMI input)
Use this setting for PC connected via HDMI terminal
when receiving PC signal format. This setting will
display the image correctly without distortion or picture
clipping.
PC Wide (only for HDMI input)
Use this setting for PC connected via HDMI terminal
when receiving PC signal format. This setting will display
the image without picture clipping.
NOTE:
• Using the special functions to change the size of the
displayed image (e.g. changing the height/width
ratio) for the purpose of public display or commercial
gain may infringe on copyright laws.
• If the aspect ratio of the selected format is diff erent
from the one of the TV transmission or video
programme, it can cause a diff erence in vision. Change
to the correct aspect ratio picture size.
Adjusting the picture quality
You can adjust the basic picture quality.
1 Press MENU / C c to highlight PICTURE icon.
PICTURE
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Colour Temperature
Noise Reduction
OK Enter
100
100
50
50
0
0
Cool
Low
100
2 Press B or b to select either Backlight, Contrast,
Brightness, Colour, Tint or Sharpness and press
OK.
3 Press C or c to adjust the settings.
Selecting the Colour Temperature
You can change the tone of the picture by selecting
from three preset colour temperatures: Cool, Natural or
Warm.
1 In the PICTURE menu, press B or b to select Colour
Temperature.
2 Press C or c to select mode you prefer.
Cool : Lends a blue hue to the picture.
Natural : Neutral
Warm : Lends a red hue to the picture.
CONTROLS AND FEATURES