Toshiba HV10 - Manual (Page 6)

6
AC IN
HDMI device
the back of your television
HDMI
HDMI cable
Connecting an HDMI® device
The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI
source device.
This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant consumer electronic devices (such as a set-top box or DVD player with HDMI
output).
NOTE: Supported Audio format: Linear PCM sampling rate 32/44.1/48kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) to the HDMI
terminal.
For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo (
).
• If your HDMI connection is capable of 1080p and/or
your television is capable of refresh rates greater than
50Hz, you will need a Category 2 cable. Conventional
HDMI/DVI cable may not work properly with this
model.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required.
Connecting a computer
When connecting a PC to the HDMI terminal on the
television, use an HDMI-to-DVI adaptor cable.
If connecting a PC with an HDMI terminal, use an HDMI
cable (type A connector).
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC
signal, the PC signal may not be detected correctly.
HDMI-to-DVI
adaptor cable
the back of your television
Computer
HDMI
CONNECTING YOUR TV
HDMI, the HDMI logo, and High-Defi nition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing, LLC.