Toshiba HV10 - Manual (Page 4)

4
The remote control
Simple at-a-glance reference of your remote control.
1 For On/Standby mode
2 To set the sleep time
3 To select external input sources
4 Number buttons
5 To return to the previous programme
6 To display on-screen information
7 Widescreen viewing
8
s Stereo/bilingual transmissions
9 To mute the TV sound
10 On-screen Menus
11 To return to previous Menu
12 To exit menus
13 To change programme positions
When no menu is on screen, these buttons select
the programme position.
To select menu up or down
When using menus, the arrows move the cursor on
the screen up or down.
14 To alter the TV volume
When no menu is on-screen, these buttons adjust
the volume level.
To select menu left or right
When using menus, the arrows move the cursor on
the screen left or right.
15 To confi rm your selection
Inserting batteries and eff ective range
Remove the back cover to reveal the battery
compartment and make sure the batteries are inserted
the proper way. Suitable battery types for this remote
are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or
mix battery types. Remove dead batteries immediately to
prevent acid from leaking into the battery compartment.
Dispose of them in accordance with instructions on page
15 of this manual.
Warning: Batteries must not be exposed to excessive
heat such as sunshine, fi re or the like.
The performance of the remote control will deteriorate
beyond a distance of fi ve metres or outside an angle
of 30 degrees from the centre of the television. If the
operating range becomes reduced, the batteries may
need replacing.
2
5
8
0
BACK
SLEEP
1
4
7
MENU
3
6
9
EXIT
OK
CT-90400
8
9
12
11
13
6
3
5
7
10
15
14
4
1
2
INSTALLING YOUR TV